This new regulation defines the new testing standards for 4G and 5G technologies, which is similar to ETSI requirements.

The devices define as 3 categories:

1. Category 1 devices: end-user devices or customer premise equipment

2. Category 2 devices: Base Stations

3. Category 3 devices: Fixed Stations

In determining what devices should be eligible for class licensing, the Authority shall consider the following:

– Maximum effective radiated power (ERP)/ effective isotropic. radiated power (EIRP);

(for example, the max. output power of category 1 devices is 24dBm; category 2 devices for private indoor use is 30dBm)

– Frequency range of operation of the device;

– Potential for the device to cause harmful interference to all other station and spectrum licences;

– The extent to which the device is available in the market or ‘off-the shelf’; and

– International best practices in respect of the licensing of the respective device.

Wi-Fi 7, based on the same standard as Wi-Fi 6E, utilizes frequencies extending from the 2.4/5GHz bands to the 6GHz band. While operating within the same frequency range as Wi-Fi 6E, Wi-Fi 7 offers enhancements such as doubling the channel bandwidth compared to Wi-Fi 6E, improvements in modulation and streaming techniques, and the introduction of Multi-Link Operation (MLO), potentially resulting in up to 4.8 times faster speeds than Wi-Fi 6/6E. To align with the Wi-Fi 7 standard, MSIT plans to revise the technical standards (notifications) to expand the channel bandwidth per channel from the current 160MHz to 320MHz by the first half of this year.

– Base Station for Cellular Network

– Smart Electricity Meter

– SIM

– Mobile Radio Trunking System

– VHF UHF Radio System Equipment

– PTP PMP Microwave Fixed Radio System

– LAN Switch

– Router

– IP Security Equipment

– Satellite Communication Equipment

The last day to accept ILAC accredited lab test reports from non-border sharing countries has been extended by four months from March 31, 2024, to July 31, 2024 for the following products:

– Base Station for Cellular Network

– SIM

– VHF UHF Radio System Equipment

– Satellite Communication Equipment

Key Updates in Regulation No. 109/2024

Updated List of Accredited Laboratories

SDPPI has updated the list of overseas laboratories accredited to handle non-HKT (Household, Kitchen, and Toys) devices. The new list is integral for compliance as only test reports from these accredited laboratories will be accepted for the certification process. This revision ensures that all evaluations are conducted under standardized and approved conditions, enhancing reliability across the board.

Consistency of Test Report Locations

A significant update is the requirement for the consistency of test location addresses. The address stated on the test report must match exactly with the address listed on the SDPPI website. Any inconsistency or discrepancy will lead to the rejection of the certification application, emphasizing the importance of accuracy in documentation.

Alignment of Test Lab Scope with SDPPI Requirements

Laboratories must ensure that their testing scope aligns precisely with the specifications listed on the SDPPI website. This alignment is crucial for maintaining the integrity of the certification process and ensuring that all tests adhere to the national standards and requirements.

Local Testing Requirement for Optical Safety Lasers

In a shift towards stricter compliance, optical safety lasers must now be tested in local laboratories rather than relying on overseas reports. This move aims to bolster the testing framework within Indonesia and ensure that all safety protocols are met with rigor.

Mandatory Digital Signatures on Test Reports

To further secure the certification process, all test reports—both existing and new—must feature a digital signature. This requirement guarantees the authenticity of the documents and curbs potential fraud, setting a new standard in the verification process.

The implementation of SDPPI Regulation No. 109/2024 marks a significant step towards enhancing the regulatory framework for telecommunication devices in Indonesia. These updates not only streamline the certification process but also reinforce the commitment to upholding high standards of safety and compliance. Stakeholders are advised to review these changes thoroughly and prepare to align their operations accordingly.

Circular 02/2024/TT-BTTTT will officially replace Circular 04/2023/TT-BTTTT as of 15th May 2024.

Some of the most notable points included within new Circular 02/2024/TT-BTTTT are detailed below:

(1)   Some new and updated standards, such as QCVN117:2023/BTTTT, QCVN55:2023/BTTTT, QCVN110:2023/BTTTT and QCVN111:2023/BTTTT, are covered and will be applied under this new Circular.

(2)   Regarding standard QCVN117:2020/BTTTT for mobile terminal equipment (2G, 3G and 4G), existing Type Approval certificates granted to this standard will remain valid until their expiry dates. However, any MIC Approvals for non-mobile phones and which do not support 4G will automatically expire on 30th June 2024 and must be re-approved to new standard QCVN117:2023/BTTTT. In addition, and from 1st July 2024, 4G support will be mandatory.

This is in line with MIC’s intention to shut down the 2G and 3G networks.

(3)   Extreme conditions testing for all products, except for WiFi modems and access points, will now be not mandatory until 30th June 2025. However, local test laboratories may still perform extreme conditions testing against the applicable Vietnamese standards in advance of this date at the request of manufacturers / applicants. If extreme conditions testing is not performed, manufacturers / applicants must ensure these tests are performed and MIC Approval certificates updated before 30th June 2025.

(4)   Regarding 5G mobile phones, these must support SA and NSA operating modes and support the frequency bands as established in QCVN127:2021/BTTTT.

(5)   For any wireless charging devices, QCVN55:2011/BTTTT (changing to QCVN55:2023/BTTTT from 1st July 2024) will no longer be applicable. Only QCVN96:2015/BTTTT will apply moving forwards.

(6)   For any vehicle radars, QCVN 124:2021/BTTTT will no longer be applicable. Only QCVN18:2022/BTTTT will apply moving forwards.

(7)   Type Approval certification and SDoC will not be required for any imported products (such as laptops, desktop computers, tablets etc) if these are imported solely for personal use and the number of units to be imported does not exceed 3 in total.

Compliance to TCVN 11848:2021 will be required for all notebooks and tablets, irrespective of whether they have been imported into Vietnam before the 1st January 2025 implementation date.

For tablets specifically, the application of MEPS is subject to the description of the tablet in question. This standard is applicable to tablets designed for portable purposes, which meet the following description items:

(1)   The integrated screen is between 6.5 inches and 17.4 inches in size.

(2)   There is no physical keyboard integrated.

(3)   Input information is made by touch screen.

(4)   Be able to connect with wireless networks (Wi-Fi, 3G etc.)

(5)   Be powered by battery; power supply connection is for battery charging only.

It is understood that local test laboratories are already accredited to perform tests to TCVN 11848:2021, and therefore compliance may now be sought in advance of the mandatory implementation date. Exemption letters to TCVN 11848:2021 are no longer possible.

The Draft International Mobile Telecommunications (IMT) Roadmap outlines the Authority’s suggestions regarding the utilization of radio frequency spectrum for International Mobile Telecommunications (IMT) within South Africa. Intended to replace the 2019 edition, the IMT Roadmap 2024 enhances the directives outlined in the “Final Frequency Migration Plan 2019.”